Build a Guy Contemporary Bathroom Vanities

0

Contemporary bathroom vanities – Putting together a guy vanity with a simple cover is a single construction project where you can create an attractive finished project and begin learning process that goes into making a cupboard. A guy vanity only requires the construction of a hinged door and no drawers, so it’s a good place to start to learn cabinet making skills. Build a guy contemporary bathroom vanities, build base for your freezer. Put the base together. First screw together four long pieces. This is done with two 1 ½-inch wood screws inserted in front and behind. First countersink and then use a pilot hole and then screw the base together so that the screws go all the way into the woods. The base will still be flexible on this point, but when you put the four belts in the corners, so the base must be rigid. Cut two pieces of plywood at exactly 30 ½ inches by 30 ½ inches. These pieces will be the bottom and top of your vanity, but they will not show.

Build a guy contemporary bathroom vanities, cut the boards to the bottom of the cabinet. Glue the boards to the plywood, and screw them from the bottom by means of 1-inch wood screws. No need to countersink here. Build back piece of the cabinet. It will be a full 31 ½ inches long, but the height will be 30 inches, because it sits on top of a base plus a ½ inch piece of plywood.

Finally to build a guy contemporary bathroom vanities, make the two side pieces. Sit back and two side pieces on top of the base and temporary attach with screws. Make the front with four full width 1 X 4 pieces clear pine. Place the sheet of plywood on top, and then put the front piece should turn right into plywood. Build the door to the opening in the front. It is designed to be seven boards wide with a width of exactly 24 ½ inches. The height should match the opening. Use two lengths of the bright guy at 24 ½ inches to serve as support. Glue and screw them, then add a row and a set of hinge.

Comments are closed.