Replacing bathroom faucet is something that has to do with the time in every home. This may or may not be a difficult task, depending on how tight the old faucet and faucets are. To remove and replace the faucet are some steps to be followed.
Instructions to replacing bathroom faucet: measure the size of the key that is in use. Turn off the water to the house. Remove the faucet is in place. The faucet should easily unscrew; otherwise plumbers wrench can be used to unscrew.
Look for any pipes. If the pipes are too short, an adapter kit can be purchased to solve the problem. Apply pipe tape to the pipe that will receive the new plumbers tape faucet. Using make a perfect fit and prevent leakage. Slide the key plate in the neck of the pipe. Squeeze the tube.
Remove the hot and cold tapas in the old faucets, if they are being replaced. Loosen with a screwdriver and remove faucets. Apply new faucets, tighten the screws and replace the hot and cold tapas. Finally, to replacing bathroom faucet, turn the water back on. The new tap is ready for use.