Stylish Traditional Bathroom Vanities

0

Traditional bathroom vanities – Adequate preparation will preserve the wood of ancient and enhance beauty, restore it to a good condition and so its style and elegance to shine. Production of wood to be used in a bathroom includes stripping old stain, restraining and sealing the wood. You must also decide if the vanity will have a sink attached to it or near it, as the amount of direct water that your antique exposed will determine the kind of finish you use. Make a traditional bathroom vanities, strip ancient of the original finish. Sand the finish line down with high-grit sandpaper, between 100 and 150 grit. Dry the surface after sanding with a damp cloth. Apply a chemical stripper to the finish line.

How to make traditional bathroom vanities, clean chemical stripper out of the tree with water. Apply a thin coat of oil-based stain. Although there are many different varieties of stains and varnishes are the best solution for wood that will be in a bathroom. Applying a thicker second layer after the first layer has been recorded in the tree, but before it is dried. And use a cloth to apply the stain and move the spot of the forest with the grain rather than against it. Remove excess stain with a clean cloth and let the wood dry completely. Apply a very thin coat of finish to the dry surface. Apply evenly and let it dry, then sand the surface with 400 grit sandpaper. Wipe down the surface with a dry cloth. This will seal the stain.

After that to make traditional bathroom vanities, apply the finish in several layers, sanding between coats. Use a medium to high-gloss polyurethane finish, because it is water-resistant and long life. Choose a mirror with an elegant antique feel to compliment your restored antique vanity. Hang the mirror on the wall just behind the traditional bathroom vanities or attach it to the vanity itself. Avoid excess water to sit directly on the tree and install an exhaust ceiling fan (if one is not already installed) to ensure proper ventilation and to reduce the humidity in the bathroom.

Comments are closed.